- Connects 2 magazines end to end for increased capacity without having to reload
- Protective boot for non-used feed lips
- Strong….connection joint, flexible rubber backed up with rigid side plates
- Works with Both 17 and 31 round magazines
- 100% legal in USPSA!
The TACCOM coupler connects 2 Glock magazines, ‘hole to hole’ to allow loading and feeding of ammo from one end of the magazine assembly. The other end is covered with a rubber boot to protect the feed lips.
You can assemble a 17 and 31 round magazine to get a total of 48 rounds that you can fire without a reload, or, if you choose, you can connect (2) 17’s for 34 rounds or (2) 31’s for 62 rounds.
The follower may need to be chamfered on the bottom to allow smooth flow thru the magazines.
This coupler is actually stronger than the parent magazines…..and we guarantee it
We've heard about some issues with the Glock Splice kit......and lots of people get them to run (and run great) other not so much. Consider this a PSA on how to get that splice running AWESOME!!!.......This will also be helpful for ANY extended magazine where the follower comes completely out of the bottom of the magazine.
1) Chamfers......make sure that you chamfer the bottoms of the magazines, you have a follower that is totally coming out and going back in and you don't want any snags. And to that end.....look at the picture. Getting rid of the slide lock feature is HUGE.....that is dead sharp and will catch on the bottom of the magazine bottom
2) tightening the screws......'twirl' the allen key in your fingers, don't go any tighter. Will the screws back out? they could/can.....either wrap tape around the splice or use a little loctite.
3) OAL......yes, for Glock magazines, you need to watch that and especially with an extension or a splice you REALLY need to watch that. The angle of the individual rounds can change in a longer stack. SO you might say....I need my rounds longer, well, you might want to consider a different platform then, cause the Glock mag will not allow you to go too long. Another note....if the spliced mags or extended Glock mags work with factory ammo, but not your reloads.....consider something different with bullet profile or length. Remember.....one of the biggest lies in PCC is that you can run your pistol ammo.
SO if you are having issues.......try what you see here.....let us know what you've found.
Retired
Works great, and easy to put together. It appears that there are 2 ways to assemble coupler. I went on YouTube to see assembly of coupler by Taccom. The written instructions (included with coupler) are somewhat opposed to YouTube video. I recommend assembling the way the Taccom YouTube video shows. The long spring in short mag, and short spring in long mag with short mag inserting into gun.
Yes Sir!
Want to make your pcc the funnest thing on the planet? This mag coupler from taccom makes it happen! Works flawlessly and makes reloads a thing of the past! For sure recommend this to anybody wanting an edge.